Sliding Grille

Sliding and Folding Security Grille

Features :

GLASSESSENTIAL® FlLEXGUARD Sliding and Folding Security Grille provide high security because of its strong built.FlLEXGUARD Sliding Grille is a good choice for floor to ceiling area dividers in public spaces such as offices, hospitals, food courts and lobbies. The FlLEXGUARD folding Security Grille door should also be considered for areas enclosed by glass for added protection if the glass should ever break.FlLEXGUARD Sliding grille is a  solid, substantial grilles that will stand up to the rigors of use in schools and stadiums.

Recommended Application

• Banks
• Airports
• Storefront security
• Reception counter security
• Patio door security 

Get Checkerboard view in "Concept 66" Security Sliding Grille

"Concept 66" Security grilles come in a Checkered design aluminum Panels. Checkered design provide remarkable appeal. "Concept 66"  T sliding Shutter door is a open style and flexible aluminum folding grille and closure systems GlassEssential custom manufactures Concept 66 Sliding and folding security grille. The checkerboard  panel design will  allow view but difficult reach inside  makes it i a complete security grille  barrier . Concept 66 Sliding grille door  is an ideal model for  interior or exterior security applications. We Supply and install  folding aluminum closure model “Concept 66”  to leading business, airports and retailers.

Concept 66 Details for Designers, Architects and Contractors.

Concept 66 from GLASSESSENTIAL® Sliding and Folding Grilles provides tried and tested security and is yet quite cost-effective. It is open-style in nature with rugged but attractive looks.

The Concept 99 model Sliding and Folding Security Grille is cost-effective and provides dependable security. This security grille is an open style sliding grille model. It stands out for its ruggedness yet attractive looks.

CONCEPT 1212 (Openstyle) is a Simple, and flexible aluminum folding grille and closure systems GlassEssential custom manufactures CONCEPT 1212 (Openstyle) Sliding and folding security grille. The checkered panel design allow some airflow to  breathe easy with CONCEPT 1212 (Openstyle). .CONCEPT 1212 (Openstyle). sliding grille  is an ideal model for  interior or exterior security applications.We Supply and install d folding aluminum closure model “Concept 1212”.

GLASSESSENTIAL® Concept 1212 sliding and folding security grilles, known for its durability. This model is open style and attractive, not only having rugged looks but also providing high security.The Folding aluminum Sliding Grille model “Concept 1212” is perfect for schools, hospitals, stadiums and more!

• Aluminum folding grille for window security
• Top and Bottom track included
• Locking on right or left
• Fold on one side
• Offset Design so grille will not obstruct to window.
• Available in  Concept 12 /S126 model

• Sliding Grille Track Dimension : 1"5/16 W X 1" 9/16 h
• Material: Aluminum Alloy
• Standard Radius Available: 14" , 10"
• Standard Angle : 90 Degree, 45 Degree
• Our Track can be bend at site for desired angle.
• *Speical Radius Curve Available at Special Request.

• HEIGHT: Check that the opening sizes, height and width correspond to the dimensions of the drawing. If not, check with an agent before proceeding.
• TRACK SUPPORT: Before starting the installation, check the bulkhead to verify the strength to support the closure weight, especially in the pocket area. Minimum 1-1/2" thick wood is required.  If in doubt, check with the agent before proceeding.
• CLEARANCE: Before proceeding, be sure that you have a clearance of 4” on each side of the center line of the track, all along the closure.  Be sure that the pocket depth is sufficient to stack the closure.  This depth should be approximately 1/7th of the clear opening. If not, check with the agent before proceeding.
• Install the curves first, and then continue using the longest track sections next. The screws should be centered 6" apart in curves and pocket and 12" elsewhere and at each end.  Alignment flat-bar and pins (see drawing) are supplied to help join the different sections of track.  Keep one joint open to insert all closure trolleys. Each cut should be squared.
• PARTITION: Insert all trolleys per section of closure into the track, making sure that each trolley wheel is in the same direction Section A from the locking end, (opposite to the pocket). Screw the wall jamb to the wall.  Screw or rivet the other sections together.  Extend the closure across the opening. When there is no pocket, screw the fixed end post to opposite wall (installation between jambs).

FLOATING END POST

• Lock the lead post to the wall striker.
• Extend the closure up to the pocket and pull using light pressure.
• Mark the track in front of the hanging rod holding the floating end post for the track blocking (see drawing).
• Mark the floor just in front of this post for the "V" guide.
• BI-PART: When the closure is made of two parts closing in the center, (bi-part) with pockets at each end, lock the two parts together in the center and proceed as in #6.
  

• Lock the closure.
  
• Locate and mark on the floor the bolt positions of the intermediate posts, making sure the sections are evenly distributed.
• Stack the closure in the pocket.
• Drill holes with 7/8" drill bit and install floor sockets.
• Be careful not to break the tiles or damage the carpets.

CLEAN AND LUBRICATE THE ENTIRE TRACK

CHECK THE INSTALLATION

• Locks and shoot-bolts should operate without resistance
• Open and close the closure several times to be sure that it operates easily.