Wood Roll Up Shutter Architectural Specifications

We’re dedicated to continuing our tradition of providing you with the finest in custom craftsmanship, product selection and value. But we don’t stop there. We’re also committed to making your job easier and as problem-free as possible. The information below is designed to simplify your specification process and help ensure the selection of a our Roll-Up Door that bests meets your client’s needs and application requirements.

 

Of course, we’re always available to answer any question or comment you might have, so contact us or connect by phone, fax or email.

Our Wood  Roll-Up Doors shall be upward coiling, factory finished (unfinished available). Individual slats are interconnected using plastic coated aircraft-grade stainless steel cable, fixed at top and bottom. Woodfold Roll-Up Doors shall be suspended from manufacturer-provided overhead coiling system utilizing manual, awning crank, or electric motor driven operation. All necessary hardware and materials shall be included for normal installation.

 

Materials:

Curtain, Hood, Fascia and Guide Rails available in Birch, Cherry, Mahogany, Maple and Oak. Additional hardwoods available.

Operation:

Manual, Motorized or Crank.

 

Finish:

Clear Finish, Custom Stain, Custom Paint or Unfinished.

Latch:

Keylock, Thumbturn or Slide bolts.

 

Component Dimensions:

Curtain Slats 1/2” x 1-1/2”. Bottom Bar 1-5/8” x 5”.

 

Width:

Up to 12’- 0”.

Height:

Up to 8’- 0”.

 

Weight:

Installed Weight is approximately 10 lbs.Per Square Foot.

Benefits of Our Factory Finishing :

Whereas other Roll-Up doors finished on the jobsite tend to suffer from unsightly missed coverage on the top, bottom and ends, Woodfold insists on individually finishing each piece prior to assembly. Factory finishing also prevents moisture buildup inside the wood, which leads to warping and can seriously hamper both the operation and the appearance of the door.

 

Quality and Strength :

Our custom Roll-Up doors can be finished in clear lacquer, custom stains and/or paints. To increase strength and

durability, each hardwood slat is individually attached with strong, plastic-coated, aircraft-grade stainless steel cables and fixed at top and bottom. Last, each Roll-Up door is installed and tested prior to shipping, then sent in durable crating, thus ensuring everything possible is done to have all pieces arrive undamaged.

 

LEED® Credits & FSC Certification : :

Select FSC* certified hardwoods (subject to availability) may contribute toward LEED** credits or other green building rating systems.

 

Our Guarantee :

All our doors are custom made to fit each opening and warranted against failure due to defective materials or workmanship.

Architectural :