Skip to content

GlassEssential.com

VirtueMart
Your Cart is currently empty.

Site Tools
Narrow screen resolution Wide screen resolution Auto adjust screen size Increase font size Decrease font size Default font size default color blue color green color
You are here: Home arrow Rolling Shutter -Full Egress

Rolling Shutter,Full Egress

Rolling Shutter ,Roll up  and Full Egress

rolling_shutter_egress_animation.gif

 

rolling_shutter_paddle_animation.gif

 


  • Solid Aluminum Rolling Shutter,Roll-up Shutter

  • Fully code compliant egress for Rolling Shutter

  • With Our Rolling Shutter,you do not need to Crawl underneath of rolling shutter for emergency exit

  • Meets 3.3.1.11 requirement of the Ontario Building Code-Available in smaller and 10+ feet wide, 8+ feet high.

  • The egress is easily operated by a paddle release that is fully compliant with the requirements of 3.3.1.12 "Doors and Door Hardware" section of the ontario Building Code.

  • The steel header plates of roll-up shutter are connected across by 1" sq.-16 gauge steel tubes that are tensioned to create a stiff, solid self-supporting frame for the shutter.

  • The egress of our rolling shutter can swing either way, coil in or coil out.The simplest configuration is "coil out". If it is oriented "coil in", the exterior face of the shutter is flat and will take a flush valence.The inside face will need a recess box to contain the coil.

  • Our rolling Shutter can be Install Face-of-wall installation or between jambs . Very Easy and Speedy Installation

  • No overhead support is necessary and they install to smooth vertical mullions or columns and to the floor with hidden studs

  • Our Roll-up Shutters are made of All extruded 6063 aluminum that can have a solid slat , can be glazed with 1/8" thick polycarbonate, or have perforated metal insert or can be configured as a rolling grille.

  • The flat slat is a tough 0.050" thick and it pivots at both ends in a hinge extrusion. This gives us an exceptionally compact coil that allows us to wind our shutters around small diameter tubes ( 2-1/2" dia. in this case).

  • We use tubular Somfy tubular motors for our rolling shutter that fit inside the tubes, both improving the header clearance and allowing us to build a self-supporting steel framework Large Motor load size require, No Large Recoil Box Require for getting larger size shutter-Reduce Header Recoil size by 30- 40 %

  • Ease of Installation by DIY

Rolling Shutter,Full Egress


 
< Prev   Next >
PVC Rolling Shutter (Vinyl)

Rolling Shutter-PVC -Vinyl
+ Read More

Rolling Shutter Housing

Rolling Shutter Housing Select Rolling Shutter Hood (Housing ) Design
+ Read More

Wood Roll Up Shutter Door Hardwood,Stain and Finish Options

Wood Roll Up Shutter Door Hardwood,Stain and Finish Options Hardwood Options Our Wood  Roll-Up Shutter Doors are custom-crafted of the finest natural hardwoods,...
+ Read More

Translate